Dynamic Discontinuous Control for Active Control of Mechanical Vibrations

Authors

  • Orestes Llanes Santiago Instituto Superior Politécnico José Antonio Echeverría. Cujae
  • Alberto Prieto Moreno Instituto Superior Politécnico José Antonio Echeverría. Cujae

Keywords:

Discontinuous Control, Sliding Modes, Active Control, Mechanical Vibrations

Abstract

This article shows the use of the discontinuous control using dynamic sliding modes for the active isolation of vibrations in mechanical systems. This type of control law constitutes a robust feedback control policy due to its insensitivity to external disturbance inputs, certain immunity to model parameter variations, within known bounds, and to the ever present modelling errors.  The whole theoretical analysis is applied to a lineal model of two degrees of freedom of the vehicle's suspension where the irregularities of the land represent of direct  way the external interferences to the system . To carry out the isolation an electro-hydraulic operator it is used. Simulations are performed which validate the proposed approach.

Author Biographies

Orestes Llanes Santiago, Instituto Superior Politécnico José Antonio Echeverría. Cujae

Ingeniero Electricista, Doctor en Ciencias Aplicadas, Profesor Titular. Trabaja en la Facultad de Eléctrica del  ISPJAE. e-mail: orestes@electrica.cujae.edu.cu. Sus intereses fundamentales de investigación está en el control de sistemas no lineales, control inteligente y diagnóstico de fallos en sistemas industriales

Alberto Prieto Moreno, Instituto Superior Politécnico José Antonio Echeverría. Cujae

Instituto Superior Politécnico José Antonio Echeverría, Cujae, Ciudad de La Habana, Cuba

Published

2010-03-01

How to Cite

Llanes Santiago, O., & Prieto Moreno, A. (2010). Dynamic Discontinuous Control for Active Control of Mechanical Vibrations. Revista Cubana De Ingeniería, 1(1), 19–28. Retrieved from https://rci.cujae.edu.cu/index.php/rci/article/view/4

Issue

Section

Original Articles